| Housing for interior installation of
standard devices, built as a modular system conforming to
standards.
|
Device racks made of: hollow
aluminium section with two chambers aluminium die-cast
corner connectors (Utility Model Protection No. G 89 03
169.5) |
|
Panels double shelled, 20 mm thick,
made of galvanised steel sheet |
|
Sheet thickness: 1.00 mm - 1,25 mm
(depending on size of unit) |
|
Insulation of incombustible, noise-
and heat-blocking spun-glass
mats |
Thanks to the two-chamber
system, temperature equalisation from outside to inside is
delayed, so that condensation is almost completely
excluded.
Air conditioning unit and ventilation
equipment is built according to the kit system and can be
produced in any desired combination.
Housings consisting of a
device mounting frame made of special hollow aluminium
sections as well as aluminium die-cast corner
connectors.
Side pieces are screwed
in the inner section chamber so that no fixing elements extend
into the device. The interiors of the devices are completely
smooth.
Wall thickness
20 mm
Insulation rating K = 1,25 W/m2K
Mean sound
insulation rating Rw = 30 dB
according to DIN
52210
Having a modular
construction, the device is easy to assemble and dismantle for
shipping and handling. If desired, housings can be made to be
fully disassembled.
Air volume: 500 - 18.000 m³/h
|
